Hydraulic Motors
Federal Fluid Power is the leading distributor of Hydraulic Motors from such manufacturers as White, Delta Power, Brevini SAM Hydraulik, Dynex Rivett, Metaris, Poclain, Cross...and more.
Federal Fluid Power is a full service hydraulic component distributor offering application engineering services and design assistance. With more than 35 product lines represented by over 30 different manufacturers, Federal Fluid Power has components in stock to get you up and running and keep you moving.
Fill the above form for a fast response.
Products > Hydraulic Motors
-
- White Drive Products Hydraulic Motor
-
- Interchangeable with most competitive models: Eaton Charlynn, Sauer Danfoss, Parker
- Speeds up to 1,020 rpm
- Flows up to 60 gpm [227 lpm]
- Pressures up to 3,500 psi [241 bar]
- Torques up to 29,580 lb-in [334 daNm]
- Integrated over-running checks, relief valves, flow controls, electric on/off
- Motor/brake combinations with displacements ranging from 3.2 - 127.7 cid [52 - 2093 cc] and holding torques up to 14,000 lb-in [1582 Nm],
- Standard SAE mounts
- Wheel hubs and Warn hub free wheel lockouts
- Light Duty RS (200), RG (255), WG (275)
- Medium Duty HB (300,310), HK (315), CE (400,410,420,430)
- Medium-Heavy Duty RE (500,520,530,540)
- Heavy Duty DR (600,610,620,630,640), DT (700,710), D9 (800)
- Stand Alone Brakes SB (930), BK (910)
- Visit our outlet store
- With motors that are interchangeable with most competitive models, White Drive Products offers many different options and a variety of solutions for many applications. With speeds up to 1,020 rpm, flows up to 60 gpm [227 lpm], pressures up to 3,500 psi [241 bar], and torques up to 29,580 lb-in [334 daNm].
- Back to the top of this page -OR- Back to main products page
- SAM Hydraulik Bent Axis Piston Motors
- SAM Hydraulik offers bent axis, axial piston hydraulic motors with fixed or variable displacements for open and closed circuits. Motors are available in metric and SAE mounting configuration. A range of flangeable accessory valves is also available.
-
- Displacement:
from 6.06 to 225.1 cm3/rev
[from 0.37 to 13.73 in3/rev] - Flow range:
from 61 to 563 l/min
[from 16.1 to 148 U.S. gpm] - Output speed:
up to 5590 rpm (Max) - Pressure range:
from 350 to 450 bar (Max)
[from 5075 to 6525 psi (Max)] - Max torque:
1613 Nm [1189 lbf * ft]
- Displacement:
- Back to the top of this page -OR- Back to main products page
- Poclain Piston Motor
- Displacements from 172 to 15,000 cm (10 cubic in - 915 cubic in)
- Up to 450 bar pressure (6500psi)
- Up to 390 RPM
- Single or multiple displacement with integral shift
- With or without brake (static and dynamic)
- Different mounting options (ie. steerable/fixed)
- Wheel hub or shaft output options
- Innovative On highway solutions (ie. CDM replaces Cotta Creep Drive, axle replacement with AddiDrive for 55mph+ freewheel and <25mph hydraulic drive)
- Forklift hydro axles and more!
- Download Info Sheet [2MB .pdf]
- Back to the top of this page -OR- Back to main products page
- Piston Motors
-
- Pressures to 8000 psi (560 bar)
- Ideal for applications subject to pressure spikes, vibration, constant starting/stopping, and sudden direction reversals.
- Compact motors produce torque to 4775 lb•in at 5000 psi (540 N•m at 350 bar)
- Download Info Sheet [113KB .pdf]
- Replacement for Vickers MHT Motors
- Dynex low speed, high torque (LSHT) hydraulic motors are interchangeable with Vickers MHT motors, which are no longer in production.
- Dynex has been producing HSM Series motors for over 30 years as an alternative to Vickers. THe earliest application of these vane motors for plastic injection molding machines in the early 1970's.
- You can order HSM motors to replace MHT70, MHT90, MHT130, MHT150, MHT190, MHT220, MHT250, MHT380, MHT440, MHT500. Dynex LSHT hydraulic vane motors are a physical and functional replacement
- Download Info Sheet [190KB .pdf]
- Back to the top of this page -OR- Back to main products page
- Metaris Cast Iron Gear Motor
- Metaris Cast Iron Gear motors are designed for heavy duty operation and are directly interchangeable with Permco®, Parker Commercial® and other world manufacturers.
Metaris gear component parts are among the highest quality and are used worldwide as replacement parts in such units originally constructed by other manufacturers. - Download Info Sheet [24.8MB .pdf]
- Visit our outlet store
- Back to the top of this page -OR- Back to main products page
- Delta Cast Iron Gear Motor
-
- Keyed shaft output
- 4F17 - 4 bolt mount 2" square bolt holes (foot mount available)
- Displacements from .065 to 1.46 cu in/rev
- Up to 4000rpm
- Bi-directional
- Up to 1500psi max
- Download Info Sheet [472KB .pdf]
- Visit our outlet store
- Back to the top of this page -OR- Back to main products page
- Series 40
-
- SAE "A" 2-bolt mount. Rated to 20 gpm.
- 3500psi max - 4000rpm max
- 6 sizes: .5, .75, 1.00, 1.25, 1.50 and 1.80 in3/rev.
- Download Info Sheet [622KB .pdf]
- Visit our outlet store
- Series 50
- SAE "B" 2-bolt mount. Rated to 56 gpm.
- 3500 psi max - 3000rpm max
- 7 sizes: 1.52, 1.95, 2.32, 2.74, 3.30, 3.80 and 5.20 in3/rev.
- Download Info Sheet [767KB .pdf]
- Visit our outlet store
- Series 60
- SAE "C" mount. Rated to 108 gpm.
- 3500psi max - 3000rpm max
- 6 sizes: 4.05, 5.15, 6.15, 7.15, 8.15, 9.25 in3/rev.
- Download Info Sheet [639KB .pdf]
- Visit our outlet store
- Back to the top of this page -OR- Back to main products page